Electronics LP-24 Bedienungsanleitung PDF herunterladen (Seite 11)

11

Fig. 16 Apply control power to the circuit.

Caution: Be sure all wiring has been

properly completed and that no shock

hazard exists. The AC-24 controller is

factory set to display 100.0 Amps full

scale when connected to a 100:5 ratio

current transformer. The display range

can be verified by pressing Coarse Dis-

play Range.

Fig. 15

Fig. 15 Attach the loose current trans-

former wire to one of the AC-24 con-

troller shunt wires and attach the other

AC-24 controller shunt wire to the me-

ter lug. This procedure allows the AC-

24 controller shunt to be in series with

the existing panel meter so that both of

them receive the (transformed) motor

current (0-5 Amps). If the panel meter

is to be eliminated then connect the

two current transformer output wires

directly to the AC-24 controller shunt.

100.0

Fig. 16

1 2 ... 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare