MC Controller
MagnaValve® Media Flow Controller
Features
• Provides a power signal to the VLP-1000, LP-2000, and 100 MagnaValve®
• 10-turn potentiometer setpoint
• Accepts remote command setpoint or 0 -10 Vdc from PLC
• Easy panel mounting
• 120 Vac 50/60 Hz
Description
The MC Controller provides the power signal for the manual MagnaValves series (VLP-1000, LP-2000,
and 100 MagnaValve®). It provides a 0-100% range of output to the MagnaValve using pulse width
molulation (PWM). The controller may operate alone or in conjuction with a remote 0 - 10 Vdc setpoint
command. Both wheel- and air-type MagnaValves can be used with this controller.
A clear and comprehensive installation manual simplies installation for the MC Controller and the
product is supported by the Electronics Inc. application engineering sta.
Electronics Inc.
56790 Magnetic Drive
Mishawaka, Indiana 46545 USA
(574)256-5001
www.electronics-inc.com
Specication is subject to change without notice
Rev 1/13
MagnaValve is a registered trademark of Electronics Inc.
Available for download at www.electronics-inc.com
• VLP-1000 MagnaValve Data Sheet • 100 MagnaValve Data Sheet
• LP-2000 MagnaValve Data Sheet • MC Instruction Manual
MC
Controller
Regulated Media Flow
Control Signal
Motor
Current
Ammeter
Media Accelerated
Media
Hopper
MagnaValve
Wheel
Desired
Motor Current
The MC Controller and MagnaValve make an open-loop system
with a wheel-type machine
Kommentare zu diesen Handbüchern