Electronics 576-24 Bedienungsanleitung PDF herunterladen

ELECTRONICS INCORPORATED

SHOT PEENING TECHNOLOGY

MODEL 576-24 MagnaValve

www.electronics-inc.com

576-24data.pub 5/8/09

999381

The Model 576-24 MagnaValve is a normally closed magnetic valve suitable for

regulation of steel shot and includes a built-in sensor for accurate measurement of flow

rate. Used with the Model FC-24 Shot Flow Controller, the MagnaValve will provide

accurate and repeatable flow rates over a .2 - 2 pounds-per-minute flow range. The

576-24 MagnaValve can be re-calibrated for various shot types and sizes for higher

accuracy.

The valve construction includes a permanent magnet for normally closed operation

and an electromagnet for controlling shot flow rates. By regulating the voltage to the

electromagnet, any desired flow rate may be achieved. When power is off, the valve

will hold shot due to the permanent magnet.

The Model 576-24 MagnaValve incorporates a preamplifier circuit to allow for high

noise immunity and a 0-10 Vdc output. The valve is factory calibrated and results are

included upon request. Note: consult factory for pre-calibration using media other than

cast steel shot.

• High Accuracy - ±5% of FS

• Built-in flow sensor

• .2 - 2 lbs/min range

• Normally closed

• Requires FC - 24 Flow Controller

• Air type shot peening machines

• Variable flow rates

• No moving parts

• Steel shot or Steel grit

• With 6’ Cable

1 2

ELECTRONICS INCORPORATED SHOT PEENING TECHNOLOGY MODEL 576-24 MagnaValve www.electronics-inc.com 576-24data.pub 5/8/09 999381 The Model 576-24 MagnaV

Seite 2

56790 Magnetic Drive, Mishawaka, IN, USA 46545 (574) 256-5001 MODEL 576-24 MagnaValve 576-24data.pub 5/8/09 SPECIFICATIONS Sensor Display LED’s: Valv

Keine Kommentare

Electronics 576-24 Bedienungsanleitung